Leister IGNITER BM4 230v 1600W 139.231 for biomass boilers
IGNITER BM4 230v 1600W 139.231 for biomass boilers (wood pellet boiler and wood chip boilers). Simple end-on connector interface design for easy installation and removal into biomass boilers, with overheat protection and durable performance, as you'd expect from Leister.
Description
IGNITER BM4 230v 1600W 139.231 for Wood Pellet Boilers and Wood Chip Boilers
The new IGNITER ignition blower from Leister has been specially developed for installation into wood pellet boilers and wood chip boilers. The IGNITER BM4 with up to 1.6 kW has what it takes to operate flawlessly time after time. Simple interface design, via end-on connector plug, for easy installation or removal into any heating boiler with trouble free operation.
It comes with a well thought out assembly support for positioning into biomass boilers, and a built in connection adapter for air hose location. Also as standard is heating element protection as well as device protection via a temperature protection circuit.
Key Features:
- 230V
- 1600W
- Max. Temp 600°C
- Length 283mm
- Device width/aperture 90mm
- Easy access connection plug for easy removal/installation
- New assembly support for easy positioning in the furnace
- Connection adapter for air hose located directly on device with inner 1" thread
- Heating element protection with phototransistor and device protection via temperature protection circuit
Specification
Technical Data: Leister IGNITER BM4 230v 1600W 139.231 for biomass boilers
- Voltage V: 230
- Frequency Hz: 50-60
- Power rating kW: 1.6
- Min. air volume l/min @ 20°C: 230
- Air pressure kPa: 2.48
- Max temperature °C: 600
- Noise emission level dB (A): 68
- Aperture ∅: 90mm
- Weight kg: 1.0 (without power supply cord) 1.2
- Length 283mm
IGNITER BM4 & BR4 Installation Dimensions:
Delivery
Standard Next Working Day Delivery
£4.50 +VAT for items up to and including £100 (ex VAT)
£7.50 +VAT for items over £100 (ex VAT)
Next working day applies to orders placed online before 3pm.
LEISTER Machines and Extruders
In order to tailor the correct machine to the correct job, for all LEISTER machines and extruders, we would recommend contacting our experts either online or via +44 (0)1707 331111 to discuss your needs and to place your order. For information these items are generally available as a next day delivery, if ordered before 3pm, with delivery charged at £11.95 +VAT
Delivery Exceptions and Exclusions
Unfortunately there are a few areas where next working day delivery isn't possible because of their remote location. However we always try to delivery to these areas within 2 working days. In certain circumstances items can sometimes take more than 7 days due to limited courier availability and weather conditions in these areas.
The restricted postcodes are as follows:
ZE, HS, KW, IV, AB, PH, DD, PA, BT, IM, GY, JE, PO (Isle of Wight).
Where restricted postcodes are on the Mainland delivery will be:
£4.50 +VAT for items up to and including £100 (ex VAT)
£7.50 +VAT for items over £100 (ex VAT)
A minimum of two working days applies to orders with Mainland restricted postcodes placed online before 3pm.
For restricted postcodes that are not on the Mainland delivery will be:
£14.50 +VAT for all items
For these items a minimum of two working days applies to orders placed online before 3pm.
