- Home
- Geomembrane
- Geomembrane Testing Equipment
Geomembrane Testing Equipment
Filter
11 Items
-
Leister Compressed Air Testing Device (tapered needle) 150.720
Testing the tightness of double lap seams with test channels is easy with Leister's Compresses Air Testing Instrument.
£335.92 £279.93 -
Leister VACUUM PLATE 300 230v/120v for Geomembrane seam testing
Leister VACUUM PLATE 300 for geomembrane and civil engineering seam testing. Available in 120V and 230V options. Designed to create a non-destructive vacuum seal which tests the tightness and strength of overlap seams. The vacuum strength can be regulated by adjusting the Vari-Flow valve which means that even thin membranes can be easily tested for leaks.
As low as £1,107.01 £922.51 -
Leister Vacuum Pump 120v 153.025 for Geomembrane seam testing
Leister vacuum pump 120v 153.054 for geomembrane and civil engineerig seam testing. Suitable for applications where 120v is required. Designed to be used with either the Leister vacuum bell (153.026) or the vacuum box (152.981) to create a non-destructive vacuum seal which tests the tightness and strength of overlap seams.
£1,114.25 £928.54 -
Leister Vacuum Bell 153.026 320mm for use with Leister Vacuum Pump
The Vacuum Bell from Leister measures 320mm x 320mm x 150mm high and is ideally suited for testing of smaller seam sections. It is designed for use with Leister's Vacuum Pump (153.024 230v or 153.025 120v) and will generate negative pressure differential up to 0.5bar (7.25 psi), safely working in temperatures between 0°C and 50°C.
£1,033.56 £861.30 -
Leister Vacuum Box 152.981 830x320mm for use with Leister Vacuum Pump
The Vacuum Box from Leister measures 830mm x 320mm x 150mm high and is ideally suited for testing of larger seam sections. It is designed for use with Leister's Vacuum Pump (153.024 230v or 153.025 120v) and will generate negative pressure differential up to 0.5bar (7.25 psi), safely working in temperatures between 0°C and 50°C.
£927.61 £773.01 -
Leister Coupon Cutter 20 x 150mm Civil Engineering Testing Equipment 161.540
Leister Coupon Cutter 20 x 150mm Civil Engineering Testing Equipment 145.813, designed to create a uniform 'coupon' blank incorporating the welded seam to enable seal viability and strength testing. Ideal for civil engineering work especially with geomembrane products.
-
Leister Testing & Calibration Kit 134.832 for EXAMO USB
Leister Testing & Calibration Kit 134.832 for EXAMO USB, designed to test and accurately calibrate both the EXAMO 300F USB and EXAMO 600F USB tensiometer testing machines to enable recording of accurate results for each job.
£345.08 £287.57 -
Leister Vacuum Pump 230v 153.024 for Geomembrane seam testing
Leister vacuum pump 230v 153.024 for geomembrane and civil engineerig seam testing. Designed to be used with either the Leister vacuum bell (153.026) or the vacuum box (152.981) to create a non-destructive vacuum seal which tests the tightness and strength of overlap seams.
£1,114.25 £928.54 -
Leister EXAMO USB 300F 230V
300mm on-site weld tensiometer seam/peel tester to ensure welds are up to the required strength and standard. Tests elongation, peak force and tear forces.
£8,087.99 £6,739.99 -
Leister EXAMO USB 600F 230V
On-site weld tensiometer seam/peel tester to ensure welds are up to the required strength and standard. Tests elongation, peak force and tear forces over 600mm.
£8,182.13 £6,818.44 -
Leister EXAMO 100 170.539 Hand Held Test Tool for Destructive Testing ofWelded Geomembrane
The new EXAMO 100 small, compact hand held test tool for destructive testing of welded geomembranes. With a quick clamping mechanism, the EXAMO 100 uses a cordless drill to produce a fast and reliable constant pulling speed, helping to easily monitor and improve the welding quality. Supplied with drive bit adapter and Plastic Box.
- Category
- Testing Range
- Voltage