Leister CSS EASY Temperature Controller 125.944
Leister CSS EASY Controller, the ready-wired plug-and-play solution for regulating LHS SYSTEM air heaters. With 2 independently configurable alarms and 0.2% temperatrure accuracy this regulator has a digital display allowing fast set up and providing precision regulation.
Description
Leister CSS EASY Controller 125.944
The Leister CSS EASY Controller is the ready-wired plug-and-play solution for regulating an LHS SYSTEM air heater. With the connector and all the necessary jacks to set-up a closed-loop servo system within the shortest space of time.
Leister temperature regulators allow the air temperatire of air heaters and hot air blowers to be precisely regulated. These regulatoirs are poerfectly matched to our Leister devices and facilitiate easy and fast installation. They include a digital display for target/actual temperature and 2 freely programmable alarm outputs.
Key feartures:-
- Suitable for Leister LHS SYSTEM air heaters
- PID regulation type
- Ready to use with preconfigured parameter set
- Configuration with PC and programming cable
- Highly accurate
- Alarm output
Specification
Technical Data for CSS EASY Controller
Leister air heater suitablity: LHS SYSTEM
Regulation type: PID
Ready to use with preconfigured parameter set: Y
Configuration with PC and programming cable: Y
Accuracy: > 0.2 % of scale value at 25 °C
Switchover C° / F°: Configurable via keypad
Temperature sensor / input: Type K / socket
Alarm output: 2 independently configurable alarms.
Output at 2 floating relay contacts. 4-fold connector block
Connection to air heater: RJ45 socket for Leister Control Cable (see accessories)
Voltage: 100 – 240 VAC, max. 8 VA
Mains connection lead: 3m, with Euro plug
Mechanics: Regulator built into housing, ready to operate, can also be integrated into the front panel, with cut-out 67 × 67 mm
Dimensions (L × W × H): 175 × 72 × 72 mm
Weight kg: 0.45
Delivery
Standard Next Working Day Delivery
£4.50 +VAT for items up to and including £100 (ex VAT)
£7.50 +VAT for items over £100 (ex VAT)
Next working day applies to orders placed online before 3pm.
LEISTER Machines and Extruders
In order to tailor the correct machine to the correct job, for all LEISTER machines and extruders, we would recommend contacting our experts either online or via +44 (0)1707 331111 to discuss your needs and to place your order. For information these items are generally available as a next day delivery, if ordered before 3pm, with delivery charged at £11.95 +VAT
Delivery Exceptions and Exclusions
Unfortunately there are a few areas where next working day delivery isn't possible because of their remote location. However we always try to delivery to these areas within 2 working days. In certain circumstances items can sometimes take more than 7 days due to limited courier availability and weather conditions in these areas.
The restricted postcodes are as follows:
ZE, HS, KW, IV, AB, PH, DD, PA, BT, IM, GY, JE, PO (Isle of Wight).
Where restricted postcodes are on the Mainland delivery will be:
£4.50 +VAT for items up to and including £100 (ex VAT)
£7.50 +VAT for items over £100 (ex VAT)
A minimum of two working days applies to orders with Mainland restricted postcodes placed online before 3pm.
For restricted postcodes that are not on the Mainland delivery will be:
£14.50 +VAT for all items
For these items a minimum of two working days applies to orders placed online before 3pm.