Leister EASYFLOOR 173.478 vinyl floor welding roller guide suitable for TRIAC ST/AT
The all new EASYFLOOR 173.478 from Leister has been design to reduce fatique while hand welding vinyl floors. The EASYFLOOR holds the hot air hand gun at a stable and accurate nozzle position allowing for precise joint pre-heating. It then guides nozzle along the weld with an ergonomic hand position, reducing errors and speeding up the job.
Description
The all new EASYFLOOR 173.478 from Leister for Vinyl Floor Welding.
The EASYFLOOR has been designed to take the strain out of hand-welding vinyl floors. The roller guide makes vinyl floor welding with a hot air gun like the TRIAC ST or TRIAC AT easy and fatigue free. The EASYFLOOR roller guide holds the hot air hand gun at a stable position with the nozzle held accurately at the most optimal angle and position allowing for precise joint pre-heating.
The EASYFLOOR provides an ergonomic hand position to then guide the nozzle along the weld with light consistent pressure, thereby reducing errors and speeding up the job on short and repetitive hand welds.
The new EASYFLOOR roller guide is a stable hot air hand tool holder producing consistently high quality welds. Its slim design allows for welds close to a wall or the edge of difficult objects.
The EASYFLOOR also collapses to become a stable tool rest, keeping the hot nozzle well clear of the floor - typical Swiss Quality.
Specification
Leister EASYFLOOR 173.478 vinyl floor welding roller guide suitable for TRIAC ST/AT
The all new EASYFLOOR 173.478 from Leister has been design to reduce fatique while hand welding vinyl floors. The EASYFLOOR holds the hot air hand gun at a stable and accurate nozzle position allowing for precise joint pre-heating. It then guides nozzle along the weld with an ergonomic hand position, reducing errors and speeding up the job.
Technical data
Width: 80mm
Operational Height: 300mm
Folded/Tool Rest Mode Height: 116mm (to nozzle tip)
Guide wheel: 2.5mm - 3.5mm. Two spacers ensure that the tool stands securely when it is not in use
Delivery
Standard Next Working Day Delivery
£4.50 +VAT for items up to and including £100 (ex VAT)
£7.50 +VAT for items over £100 (ex VAT)
Next working day applies to orders placed online before 3pm.
LEISTER Machines and Extruders
In order to tailor the correct machine to the correct job, for all LEISTER machines and extruders, we would recommend contacting our experts either online or via +44 (0)1707 331111 to discuss your needs and to place your order. For information these items are generally available as a next day delivery, if ordered before 3pm, with delivery charged at £11.95 +VAT
Delivery Exceptions and Exclusions
Unfortunately there are a few areas where next working day delivery isn't possible because of their remote location. However we always try to delivery to these areas within 2 working days. In certain circumstances items can sometimes take more than 7 days due to limited courier availability and weather conditions in these areas.
The restricted postcodes are as follows:
ZE, HS, KW, IV, AB, PH, DD, PA, BT, IM, GY, JE, PO (Isle of Wight).
Where restricted postcodes are on the Mainland delivery will be:
£4.50 +VAT for items up to and including £100 (ex VAT)
£7.50 +VAT for items over £100 (ex VAT)
A minimum of two working days applies to orders with Mainland restricted postcodes placed online before 3pm.
For restricted postcodes that are not on the Mainland delivery will be:
£14.50 +VAT for all items
For these items a minimum of two working days applies to orders placed online before 3pm.
